-
-
...har
#define uint unsigned int
//uchar idata buf[10]={0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09};
uchar dat1,dat2;
uchar pf;
uchar flag,flag1;
sbit key1=P1^0;
sbit key2=P2^0;
/************延时程序************/
void delay(uchar k)
{
&...
-
-
... A = 8'h0A;
B = 4'h02;
ALU_Sel = 4'h0;
for (i=0;i<=15;i=i+1)
begin
ALU_Sel...
-
-
...三相两电平逆变器SPWM的一些基本概念，下面进入正题。02三相两电平逆变器的Simulink仿真 下图为matlab 2014上搭建的三相两电平逆变器模型：图3 三相两电平逆变器simulink仿真示意图 该simulink模型...
-
-
...回路，电路板不工作，可以有效的防止电源接反的问题。02整流桥型防反接保护电路使用整流桥将电源输入变为无极输入，无论电源正接还是反接，电路板一样正常工作。以上使用二极管进行防反处理，若采用硅二极管具有0.6~0.8...
-
-
...; value;
})
// 输出: <Buffer 01 02 03 04 05>
console.log(copy)
//缓冲区合并 Buffer.concat(list[, totalLength])
let buffer1 = Buffer.from('测试例子,'),
buffer2 = Buffer.from('www.xpsilvester.com'),
buffe...
-
-
..._dot];break; //显示小数
case 1:P1_0 = 0;P0 = 0x02;P1_0 = 1;P1_0 = 0;
P0 = 0x7f&seven_seg[temp_num1%10];break; //显示个位并加小数点
case 2:
{
if(temp_num<10)break; //如果温度小于10度，且不为负值，十位0不显示
if((temp_num...
-
-
...har
#define uint unsigned int
//uchar idata buf[10]={0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09};
uchar data1,data2;
uchar pf;
uchar flag,flag1;
sbit key1=P1^0;
sbit key2=P2^0;
/************延时程序************/
void delay(uchar k)
{
...
-
-
实时时钟DS1302应用， protues仿真demo，protus 用来仿真DS1302，protus仿真实时时钟，Protues8.5及以上软件打开仿真#include<reg51.h>
#include<ds1302.c>
unsigned char flash;
unsigned char cp1,cp2,cp3; //定义变量
sbit P1_0 = P1^0; ...
-
-
...个人函数库，另外在c script中只需要加入部分代码即可。02PLECS C script工具的简单介绍 作者采用plecs 3.6.1，该软件可以作为一个工具包嵌入到Simulink中使用。里面的C-Script是专门用来在simulink仿真中运行c 代码的。...
-
-
...p; uiLastADValue[0]=adc_data;
ucInputParam0=uiLastADValue[0]*24/1024;
//ucInputParam0 = tmp/100;
//ucInputParam1 = (tmp%100)/10;
//ucInputParam2 = (tmp%100)%10;
bInputChange=1;
ucInputValue=0x01;
}
ADMUX=0x01;
break;
...
