-
-
...运会倒计时
***************************************/
#include<reg51.h>
#include<absacc.h>
#include<intrins.h>
#include "delay.h"
#define clock_segment XBYTE[0xBFFF] //时钟段码地址
#define clock_sel XBYTE[0x7FFF] //时钟位码地址
#define year...
-
-
...阅C：\ opendss \ IEEETestCases \ LineCodes \ IEEELineGeometry.dss）。51/5000创建线路（可以是一相，两相或三相线）New Line.650632 Phases=3 Bus1=RG60.1.2.3 Bus2=632.1.2.3 ~ LineCode=mtx601 Length=2000 units=ft 行定义以“ Ne...
-
-
温度计设计#include "reg51.h"
char disp[11]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f,0x40};
char disp_dot[11]={0xbf,0x86,0xdb,0xcf,0xe6,0xed,0xfd,0x87,0xff,0xef,0xc0};
sbit DQ = P1^3; //定义通信端口
//晶振12MHz
void delay_18B20(unsigned ...
-
-
单片机水塔控制系统#include<reg51.h>
//定义一个数组,使数码管显示的数字和数组元素的下标相等
unsigned char code table[]={0x3f,0x06,0x5b,0x4f,0x66,
0x6d,0x7d,0x07,...
-
-
...= new Array();
50. for (var i=0;i<currentlyOpenedMenus.length;i++) {
51. if (!containsElement(currentlyOpenedMenus[i],targetNode)) {
52. currentlyOpenedMenus[i].className = '';
53. currentlyOpenedMenus[i].parentNode.className = '';
54. currentlyOpenedMenus[i].opened = false;
55....
-
-
...行仿真，测试，Protues8.5及以上软件打开仿真#include<reg51.h>
#include<DS18B20.c>
code uchar seven_seg[]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90};
uchar cp2;
uint aa,cp1;
uint temp_num,temp_num1,temp_dot,temp;
sbit P1_0=P1^0;
void tim...
-
-
485全双工通信应用#include <reg51.h>
#include <absacc.h>
#define TR 1
#define uchar unsigned char
#define uint unsigned int
//uchar idata buf[10]={0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09};
uchar data1,data2;
uchar pf;
uchar flag,flag1;
sbit key1=P1^0;
...
-
-
...us仿真实时时钟，Protues8.5及以上软件打开仿真#include<reg51.h>
#include<ds1302.c>
unsigned char flash;
unsigned char cp1,cp2,cp3; //定义变量
sbit P1_0 = P1^0;
code unsigned char seven_seg[13] = {0xc0,0xf9,0xa4,0xb0,0x99,
0x9...
-
-
一个基于51单片机的智能寻迹小车#define uint unsigned int#define uchar unsigned char//--------------------------------------------------------------------------------//新一代 1T 8051系列 单片机内核特殊功能寄存器 C51 Core SFRs// &n...
-
-
舞蹈机器人步进机仿真#include "reg51.h"
#include "intrins.H"
//8步式步进电机脉冲序列
//unsigned char steps[8] = {0x77,0x33,0xbb,0x99,0xdd,0xcc,0xee,0x66};
unsigned char steps[8] = {0x2,0x6,0x4,0xc,0x8,0x9,0x1,0x3};
//当前各电机在上述序列中的位置
unsigned char c...
